DMReX Module
The WTE DMReX is a compact DMR module for OEM integration, telemetry, messaging and remote control. It can be used to control equipment over an existing DMR network without requiring a host processor in many applications simply provide power and connect an antenna. With high receiver sensitivity and very low DMR receive current, the DMReX is well suited to widespread non-voice control applications. Non-DMR modulation options also provide licence-free operation at higher data rates.
Features:
- Frequency Bands: 137-174 or 421-480, 863-870, 902-928 MHz.
- Telemetry Data Rates: 512 baud to 128k baud, including frequency hopping.
- High stability 0.5 ppm reference oscillator.
- Output power up to 100mW.
- High sensitivity receiver (-130 dBm at 512 baud, -119 dBm for DMR).
- POCSAG (512, 1200 baud).
- DMR data Tier I, II.
- DMR status, confirmed and unconfirmed message type support.
- Military-grade AES-256 encryption.
- Store & Forward Operation: Configurable repeater functionality with duplicate reject function for poor coverage areas.
- Supports transparent wireless point-to-point serial communication for replacing physical links
- Configured inputs can be programmed to send POCSAG and DMR messages simultaneously when triggered.
- Configured outputs can be controlled via DMR or paging messages.
- Periodic message support to ensure link integrity.
- Operation through external power supply (5-9Vdc) or 3V battery pack.
- Autonomous operation without the need for any host processor.
- Wide range of approved channel spacings from 6.25 kHz to 500 kHz depending on selected frequencies.
- Battery warning message and programmable input message support.
- Licensed and unlicensed frequency options.